This hour meter mount replaces your KTM/Husky stock hour meter so you can use Hardline Products® hour meters with existing OEM threaded holes on your KTM/Husky motorcycle.
Use on any KTM/Husqvarna motorcycle that comes with factory hour meter on handlebars or under seat.
• Includes bracket and two screws
• Easy assembly.
• Uses bike’s existing wiring.
• Does not interfere with turning radius.
• Machined from Aluminum.
• Corrosion resistant.
• Made in the USA.
• UPC 632194726529
Directions for install:
step 1: Remove center bar pad and remove stock hour meter with allen wrench.
step 2: Clip wire of stock hour meter closest to housing.
step 3: Carefully peel back black insulation 1/2″ exposing red wire. Trim black insulation off.
step 4: Thread red wire through body of Hardline Products hour meter as per meter instructions.
Step 5: Mount bracket using supplied screws.
Step 6: Place meter on top of bracket and secure with serrated screws supplied with meter.
Step 7: Reassemble bar pad.