Description
Safe. Adjustable. Built to Last.
Product Overview
Build confidence and mastery with the Universal Trainer™ Training Wheels, specifically engineered for the Razor® Pocket Mod Scooter series (including LightShow, Bellezza, Sweet Pea, and more). Designed by Hardline Products®—the premier USA-based manufacturer of youth training systems—this kit allows young riders to safely develop essential riding skills at their own pace.
Unlike generic stabilizers, our system offers complete adjustability. As your child’s balance and confidence improve, the wheels can be raised incrementally, transitioning them seamlessly from supported riding to independent two-wheel freedom.
Key Features & Benefits
- Progressive Skill Development: Our “Teach & Learn” system grows with the rider. Start with the wheels fully lowered for maximum stability. As the rider gains confidence, adjust the wheel height upward to encourage balance, eventually lifting them fully off the ground once the rider is ready for solo riding.
- Superior Stability & Engineering: The system mounts directly under the scooter floorboard using the existing center-stand mounting flanges. This central mounting point provides superior center-of-gravity balance, structural integrity, and durability compared to rear-axle mounted alternatives.
- Precision Cornering Design: Specifically engineered with wheel spacing tolerance to allow for better cornering and superior impact absorption on uneven terrain.
- Heavy-Duty Construction: Built to withstand the rigors of learning. We use a solid steel axle, heavy-duty clamps, and billet aluminum bracket mounts. All hardware consists of Grade 8 bolts, washers, and nylon locking nuts to ensure a secure, vibration-resistant fit.
- All-Terrain Pneumatic Wheels: Features high-quality 8-inch pneumatic wheels with robust 4-ply tires and sealed ball bearings that resist corrosion, ensuring a smooth ride and long-lasting performance.
Technical Specifications
- Materials: Solid Steel Axle, Billet Aluminum Mounts, Grade 8 Hardened Fasteners.
- Wheel Type: 8-inch Pneumatic with 4-Ply Tires.
- Bearings: Sealed Ball Bearings (Corrosion Resistant).
- Mounting Location: Under-floorboard (utilizes center-stand mount).
- Origin: Designed, Engineered, Assembled, and Tested in the USA (Global and Domestic Parts).
- Warranty: Limited Lifetime Guarantee.
Compatibility
This kit is custom-fit for the following Razor® Pocket Mod Miniature Scooter models:
- LightShow
- Bellezza
- Betty
- Sweet Pea
- Chrissy
- Bistro
- Kiki
- Petite
- Note: Also fits various other Pocket Mod iterations. Please check serial number location for specific assembly instructions.
Why Choose Hardline Products®?
- Trusted Expertise: We are the largest manufacturer of youth training wheels for motorcycles and scooters in the USA.
- No “One Size Fits All”: We personally fit every model bike and create custom hardware to ensure the safest, most secure fit for your specific Razor scooter.
- USA Support: Enjoy peace of mind with our American-based customer service team, available at 888-413-8315(8-5 EST).
Safety Warning & Usage
This product is a riding aid intended for skill-building only.
- Supervision Required: Do not ride without adult supervision.
- Protective Gear: Always wear a helmet, boots, and gloves.
- Terrain: Do not use on steep terrain, soft sand, or rough surfaces.
- Speed: Do not exceed 10 MPH.
- Riding Position: Feet must remain on the scooter floorboard; do not use the axle as footpegs.
Frequently Asked Questions
Installation & Compatibility
Q: How do I install the Training Wheels? A: Every Training Wheels kit comes with a video link and comprehensive step by step instructions. We design for every bike model and create hardware for a custom fit that is easy to install.
Q: My kit is missing the Axle what do I do? A: Make sure you looked under the cardboard flap that the wheels were sitting on when you opened your package. sometimes people miss it here. If you’re still missing the axle contact us immediately so we can get you a replacement. reach out to [email protected] please include a picture of your packaging and your shipping address.
Q: My package seems to be missing parts? A: Do not use Training Wheels if any part is Missing, Bent or Broken. Email us at [email protected] or call 888-413-8315. We will get you the parts you need quickly.
Q: I broke a block while tightening them down to the axle A: WARINING: DO NOT USE IF BLOCKS ARE BROKEN CONTACT HARDLINE PRODUCTS® FOR REPLACEMENT AT 888-413-8315 [email protected]
Q: How much should I tighten axle clamp blocks? A: Do not over-tighten bolt and nut to blocks on training wheels or they could break. Tighten evenly 1/8 of a turn rotating between nuts until tight. Tighten to 12-13 ft. lbs. (16.26-17.62nm). There will be a gap between blocks when finished. DO NOT OVER TIGHTEN ATTEMPTING TO CLOSE GAP. It is ok to have an uneven gap between blocks, if you do not have a torque wrench to measure foot lbs. tighten nuts a little at a time, crisscrossing until you can not rotate axle by hand. Make sure to crisscross back and forth tightening each nut and each mount a little at a time until axle does not rotate by hand up or down
Q: My axle keeps rotating up lifting the wheels off the ground how do I stop that? A: Tighten your axle blocks nuts to 12-13 ft. lbs Criss cross when tightening. Do not try to close the gap on the block between the axle and the block.
Q: Is the Hardline Products Training 1802 work on all Razor® Pocket Mod Miniature Scooters A: Yes, the kit is specifically designed for the LightShow, Bellezza, Betty, Sweet Pea, Chrissy, Bistro, Kiki and Petite.
Q: What size are the tires you use on your training wheels? A: We use 8″ 4 ply tires.
Q: Do you offer replacement tires? A: Yes, you can order Here
Q: Do you offer replacement hardware? A: yes you can order Here
Q: Will this kit fit on a Stacyc Bike? A: No. Please use our dedicated Stacyc Training Wheel kit for the easiest install order Here
Q: Do I have to remove the floor-board to install these Training wheels? A: No. Our specially designed hardware allows you to attach our training wheels right to the chassis of the bike.
Features & Operation
Q: How do I adjust the training wheels as my rider starts to achieve balance? A: Loosen the axle block clamp nuts just enough that it allows you to rotate the axle by hand up to bring the wheels off the ground. Then re-tighten the axle block nuts to hold the axle in place.
Q: Why is there a gap between the wheel and the cotter pin so the wheel can slide a bit on the axle? A: We designed this gap on purpose, this helps your training wheels corner better and less tire wear.
Durability & Lifespan
Q: Is the Hardline Products Training Wheels waterproof? A: Yes, your rider can ride through puddles. We use powder-coated paint and zinc galvanized fasteners that resist corrosion.
Q: Can I leave the training wheels on permantely? A: Yes. Always check the equipment for damage and make sure nuts & bolts are tight before riding.
UPC: 632194730854
B0FXBSN9N3
Safety Warning:
FAILURE TO USE THIS AID CORRECTLY CAN RESULT IN SERIOUS INJURY OR DEATH. ONLY USE TRAINER FOR IT’S INTENDED PURPOSE. THIS PRODUCT IS INTENDED FOR BUILDING RIDING SKILLS ONLY.
DO NOT RIDE UNSUPERVISED BY AN ADULT.
DO NOT RIDE WITH FEET PLACED IN FRONT OF TRAINING WHEELS.
DO NOT USE AXLE AS FOOT PEGS. FEET NEED TO REMAIN ON SCOOTER FLOORBOARD.
DO NOT RIDE IN CONGESTED AREAS.
DO NOT RIDE ON PUBLIC ROADS.
DO NOT RIDE ON STEEP TERRAIN.
DO NOT RIDE FASTER THAN THE ABILITY OF THE RIDER.
DO NOT RIDE WITHOUT BOOTS, GLOVES AND HELMET.
DO NOT USE ON ROUGH TERRAIN.
DO NOT USE WITH MORE THAN ONE PERSON AT A TIME.
DO NOT MODIFY EITHER THE MOTORCYCLE OR TRAINING WHEELS.
DO NOT OPERATE WITH MISSING WHEEL.
DO NOT USE IN SOFT SAND.
DO NOT USE FOR OTHER PURPOSE.
DO NOT CHANGE WHEELS.
DO NOT USE IN EXCESS OF 10 MPH.
DO NOT RACE OTHER VEHICLES.
DO NOT RIDE WITH A PASSENGER.
ALWAYS WEAR PROPER GEAR AND HELMET.
RIDE SMART! AND BE CONSIDERATE OF OTHERS!
DISCONTINUE USE IF ANY PART IS BROKEN, BENT OR MISSING.
Assembly Note: If your Razor Pocket Mod has a serial number stamped in the bottom of the chassis, mount our Axle Blocks in STEP (3) of our instructions with the Axle Blocks mounting holes positioned to the rear of the bike instead of to the front. The block will be able to sit flat on the chasis.
If you have any questions you can call 888-413-8315.
Does not include bike.
Razor® Pocket Mod Petite Miniature Scooter models Lightship, Euro, Bellezza, Petite, Betty, Sweet Pee, Vapor, Chrissy, Bistro, Kiki & Hot Mod and their brand is property of their respective owner(s). All company, product and service names used in this packaging and/or website are for identification and product compatibility purposes only. Use of this name, logo and brand does not imply endorsement or affiliation with Hardline Products Inc.®
Reviews
There are no reviews yet.