Rollastand™ for Auto Wheel Detailing

$42.99

SKU: RS-2

Description

Rollastand® Detail Wheel Cleaning Stand for Automotive Wheels.

If you have high performance car or truck with nice wheels with Brembo® brakes and painted calipers you know how much brake dust is thrown off that sticks to your rims, then add road grime and grease. You know how difficult it is to clean properly with the wheels on? Remove your wheels and place them on the Rollastand® for the easiest cleaning experience. The Rollastand also makes Polishing your rims much easier.

Click Here for Video

  • Use for Washing & Polishing Alloy or Spoked Rims and Tires.
  • Heavy Duty Design, Will Fit On Any Size Tire & Rim.
  • Powder Coated Finish & Sealed Bearings.
  • Deep Knurled Rollers for more traction when wet.
  • Easy Rotation with just one hand.
  • Use on Front or Back wheels.
  • Eliminates rolling your tires around on the ground to get at every cleaning angle.
  • Low profile-Easy One Person Operation.
  • Made from 6061-T6 Corrosion Resistant Aluminum.
  • 1 year limited warranty.
  • No Assembly Required.
  • UPC:632194727403

SAFETY WARNING:
THIS PRODUCT IS A CLEANING AID FOR WHEELS. THIS CLEANING AID MUST NEVER BE USED WITH AUTOMOTIVE ENGINE RUNNING OR WITH THE AUTO IN GEAR.
THE MANUFACTURER WARNS THAT WHEEL ROTATION MUST BE BY HAND ONLY.
THE MANUFACTURER ACCEPTS NO LIABILITY FOR INJURY TO PERSONS, OR DAMAGE TO PROPERTY THAT MAY RESULT FROM THE USE OR ABUSE OF THIS CLEANING AID.

INSTRUCTIONS FOR USE:

1. Use the Rollastand¨ on a flat and level area, such as a concrete driveway or workshop floor. Do not use the Rollastand on sloping or uneven surfaces.

2. Make sure that the motorcycle ignition is switched off and the gears are in neutral.
FOR REAR WHEEL USE:

1. Place the Rollastand a few inches in front of the back wheel.

2. Make sure that the rollers of the Rollastand¨ are at right angles to the direction the wheel to be cleaned. See photo`s on packaging or above.

3. Take the weight of the Motorcycle off the side stand and manually roll the motorcycle onto the Rollastand¨. For heavier bike you may want to straddle the bike. You will feel a small bump as the Motorcycle wheel rides over the first roller, allow the wheel to come to rest between the rollers. Allow the motorcycle to rest on the kickstand with the steering at full left lock.

4. Some owners may feel that their motorcycle is leaning too much at this point. Add a small wood block under the side stand to adjust the attitude of the motorcycle if desired.

5. The motorcycle rear wheel can now be rotated by hand to assist with cleaning or chain maintenance, if the wheel moves drifts to the side, reposition the Rollastand a few degree’s to the left on the ground before you roll your bike onto it. Some bikes with allot of kickstand rake will cause the wheel to drift when “Saddled” in the Rollastand. The wheel will not fall off the Rollastand but it is a bit harder to turn when the Rollastand is not perpendicular to the tire.

FOR FRONT WHEEL USE.

1. Place the Rollastand a few inches in front of the front wheel.

2. Make sure that the rollers of the Rollastand¨ are at right angles to the direction the wheel to be cleaned. See photo`s on packaging or above.

3. Take the weight of the Motorcycle off the side stand and manually roll the motorcycle onto the Rollastand¨. For heavier bikes you may want to straddle the bike. You will feel a small bump as the Motorcycle wheel rides over the first roller, allow the wheel to come to rest between the rollers. Keep the front wheel pointed straight ahead.

4. Some owners may feel that their motorcycle is leaning too much at this point. Add a small wood block under the side stand to adjust the attitude of the motorcycle.

5. The motorcycle front wheel can now be rotated by hand to assist with cleaning. The front wheel may move to one side of the Rollastand¨ as it is being rotated. This can be corrected by changing the direction of the front wheel as it is being rotated or repositioning the Rollastand a few degree’s to the left on the ground before you roll your bike onto it. Some bikes with allot of kickstand rake will cause the wheel to drift when “Saddled” in the Rollastand. The wheel will not fall off the Rollastand but it is a bit harder to turn when the Rollastand is not perpendicular to the tire.

Your Rollastand is protected by a powder-coated finish and has sealed bearings for a long service life. Wipe dirt & oil off with a rag. Do not immerse in solvents. Store in a dry place.
The Rollastand comes with a 12 month warranty against defective materials and workmanship.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.