Description
Includes Two (2) ABS plastic registration number plates 4″ tall x 24″ wide x 1/16″ thick for display of registration numbers on inflatables and RIBs, four cable ties, Our best selling black 3″ size Decals with 4 sets of A-Z, 0-9. Total of 144 decals enough to do both plates and Sticker-On! Decal Application Fluid for the Easiest Installation. Just spray Sticker-On! on the back of your decal and slide your decals into place nice and straight with no bubbles. Everything you need for registration is in this one package!
Your registration plates can be secured to hand lines or oar holders. Plates has enough space for your registration number sequence, mussel decal if required and yearly state permit decal.
Each package includes 4 cable ties (Zipties™) to go through pre-drilled holes on the plate. Use the grab handles, ore locks, D-rings or perimeter rope around your vessel to attach the plate. Some inflatable boat models have no where to attach the plates depending on the model if that is the case. Click Here! for our registration plate kit that uses two-sided tape for mounting.
• 2 Plates Starboard (left) and Port (right)
• Includes Sticker Kit 4 sets of A-Z, 0-9. total of 144 decals. P/N BLK350ec
• Includes Sticker-On! Decal Application Fluid for the easiest install. P/N 964
• Meets Minimum Legal size for State and Federal law.
• Resists fade fuel and scratches
• Semi-Flexible, 1/16 ABS Plastic.
• 4″ tall x 24″ wide x 1/16″ thick.
• Includes qty. 4 zip ties.
• Rounded di-cut corners
• Salt-water tough
• Plate has enough room for State Mussel Decal if required.
•Made in the USA! and ships from USA Factory.
Frequently Asked Questions
Installation & Compatibility
Q: Does this package include decals? A: Yes, part number 14-5064 includes 2 registration plates, 4 wire ties, 144 black decals (4 sets of A-Z, 0-9) and a bottle of Sticker-On! Decal Application Fluid for easiest install.
Q: How does the Sticker-On! work? A: Sticker-On! makes installing your decals easier by allowing you slide and straighten your decals before they bond with the plate. Just spray the back of the decal and the plate with Sticker-On!, then apply your decal, you can move the decals around to get the right alignment, once you have the decals the way you want them just press down on the decal with a paper towel and squeeze the fluid out. We suggest spraying all your decals first and setting them on the plate and then begin straightening them.
Q: Why do you include 4 sets of A-Z, 0-9 for a total of 144 decals in a kit? A: We include 4 sets of each because you may have duplicate numbers or letters in your registration sequence and depending on your state you may have to display your numbers on both sides of the vessel.
Q: Can I widen the holes on the plate if I don’t want to use your cable ties? A: Yes, use a sharp drill bit to
widen holes for other fasteners but be careful not to make the holes too big as you will weaken the plate.
Q: Is the plate wide enough to handle 8 characters and my state tag? A: Yes, our plates are 24″Wide x 4″ high. Plenty of room to install your registration numbers or dingy name.
Q: What side do I attach my decal too? A: Use the smooth side of the plate.
Q: Do you still label the side the decals are to be attached to? A: No. Use the smooth side of the plate.
Q: How should I space my decals so I make sure they all fit on the plate? A: Space your decals about a quarter character apart. Leave the width of one character between the state designation and your numbers. Leave another character’s width space apart before your last two numbers. For example FL 3645 JY
Q: Can I use these plates on a Kayak? A:Yes. If there is no where to attach the cable ties consider screwing plates into surface with stainless steel screws.
Q: What are other options to attach to a Kayak? A: Use our Registration Plates that come with 2-sided 3m® tape to adhere your plates. Click here to order
Q: Where does my state tag come from? A: Your state tag is supplied by your state DMV when you pay your yearly fee. If your buying a new vessel this paperwork will be started by the dealer and you will receive your “Tag” in the mail.
Features & Operation
Q: Can these handle high winds? A: Yes, when properly secured they will not break or crack.
Durability & Lifespan
Q: Can these handle being in the sun? A: Yes, we use marine grade plastic that is UV stable.
Q: Will Salt-Water harm these registration plates? A: No, you can use these registration plates in fresh-water or salt-water.
Q: Are the hook & loop straps re-useable? A: Yes, our Cable straps aka Velcro straps can be used over and over again. When you deflate your inflatable simple release the strap to remove your registration plates.
Q: These Cable Straps are awesome can I buy them separately? A: Yes, these Cable straps are great for bundling lines, hoses, rope and shore-power cords. Click Here! to order.
UPC:632194729049
B0DB6CKLNS
Installation Tip: Affix your numbers to the smooth side of the plate, Sticker-On! makes it easy to get them straight.
